Product code: ROCKERSETA
Normal Qty Required: 1
HI-TEC ALLOY/STEEL ROCKER SET for Model G and CO etc.
Product code: 200160M
Normal Qty Required: 1
CRANKSHAFT (Improved English made), 350cc, MODEL G (1" shafts)
*no longer available*
Product code: 29522
Normal Qty Required: 1
ROCKER EXHAUST, can use ROCKERSETA
ROCKER EXHAUST
Product code: 36379
Normal Qty Required: 1
ROCKER BEARING, can use ROCKERSETA
ROCKER BEARING WITH CAPS
Product code: 27089
Normal Qty Required: 8
STUD, 1/4" x 2" x 26tpi
STUD
Product code: 27305
Normal Qty Required: 8
ROCKER BEARING NUT, SMALL HEX
Product code: 9908
Normal Qty Required: 8
WASHER, ROCKER + MANIFOLD
WASHER, ROCKER + MANIFOLD
Product code: 28593
Normal Qty Required: 1
PISTON C/W RINGS **Can use 37714**
PISTON COMPLETE, STD, 6:1
Product code: 28593/15
Normal Qty Required: 1
PISTON C/W RINGS +15, New old stock
PISTON COMPLETE, +15, 6:1
Product code: 28593/30
Normal Qty Required: 1
PISTON C/W RINGS +30 **Can use 37714/30**
PISTON COMPLETE, +30, 6:1
Product code: 37714
Normal Qty Required: 1
PISTON, COMPLETE, Standard
PISTON, COMPLETE 7:1
Product code: 37714/20
Normal Qty Required: 1
PISTON, COMPLETE +20
PISTON, COMPLETE, +20, 7:1
Product code: 37714/40
Normal Qty Required: 1
PISTON, COMPLETE +40 (111826).
PISTON, COMPLETE, +40, 7:1
Product code: 37714/60
Normal Qty Required: 1
PISTON, COMPLETE +60
PISTON, COMPLETE, +60, 7:1
Product code: P/RING
Normal Qty Required: 2
PISTON RING SET, (for 1 piston)
various 250-700cc models (European Made) STANDARD (70mm)
PISTON RING SET STD (3 RINGS)
Product code: P/RING/20
Normal Qty Required: 2
PISTON RING SET, (for 1 piston)
various 250-700cc models (European Made) +20
PISTON RING SET +20 (3 RINGS)
Product code: P/RING/30
Normal Qty Required: 2
PISTON RING SET, (for 1 piston) various 250-700cc models (European Made) +30
PISTON RING SET +30 (3 RINGS)
Product code: P/RING/40
Normal Qty Required: 2
PISTON RING SET, (for 1 piston)
various 250-700cc models (European Made), +40
PISTON RING SET +40 (3 RINGS)
Product code: P/RING/60
Normal Qty Required: 2
PISTON RING SET, (for 1 piston)
various 250-700cc models (European Made), +60
PISTON RING SET +60 (3 RINGS)
Product code: 20363
Normal Qty Required: 2
CIRCLIP, PISTON (38771) Sold Individually
PISTON CIRCLIP, (38771)
Product code: 22595
Normal Qty Required: 1
GUDGEON PIN 0.75'' Diameter x 2.32'' (59mm) long. Thick inner wall (110090)
GUDGEON PIN
Product code: 22646
Normal Qty Required: 1
CON ROD (FORGED STEEL) G, CO, J, EARLY BULLET
CON ROD (STEEL) G, CO, EARLY BULLET
Product code: 32323
Normal Qty Required: 1
CON ROD, ALLOY (Can use improved forged steel conrod, part 22646)
CON ROD (ALLOY) USE ALTERNATIVE STEEL ROD PART. NO.22646
Product code: 16651
Normal Qty Required: 1
CONNECTING ROD FIXED BUSH (Must be honed after fitting to conrod)
Product code: 19885
Normal Qty Required: 1
BIG END FLOATING BUSH
Product code: 37715
Normal Qty Required: 1
CRANKPIN, (CAN USE RE8)
CRANKPIN
Product code: 16476
Normal Qty Required: 2
SCREW, OIL PLUG or BIG END, 1/4'' BSF x 0.250'' long
OIL PLUG/BIG END KEEPER SCREW
Product code: 26707
Normal Qty Required: 2
THRUST WASHER, CRANKPIN, EACH
CRANKPIN THRUST WASHER
Product code: 26903
Normal Qty Required: 1
DRIVE SHAFT 1''
DRIVE SHAFT 1
Product code: 36017
Normal Qty Required: 1
BUSH, SMALL END FOR ALLOY ROD (NOT FITTED AS STANDARD)
SMALL END BUSH
Product code: 26839
Normal Qty Required: 1
GRUB SCREW, CRANKPIN PLUG
CRANKPIN PLUG SCREW
Product code: RE8
Normal Qty Required: 1
ROLLER BIG END ASSEMBLY (Model G, CO, C +1949-55 BULLETS) - This is supplied with the crankpin, nuts, rollers. roller cage and fixed bush, please order thrust washers (2x26707) and other parts if required)
ROLLER BIG END ASSEMBLY
Shop for accessories at Hitchcocks Motorcycles