Product code: 500632
Normal Qty Required: 5

Hex Socket Screw, M5 X 20mm, E/START + LEANBURN (EACH)

HEX SOCKET HEAD CAP SCREW, M5 X 20 (EACH)

Product code: 145959
Normal Qty Required: 1

DRIVE COVER (Electric Start)

DRIVE COVER

Product code: 550094
Normal Qty Required: 1

DOWEL, 5mm ( KS + ES, 500cc + SIXTY5 ) 5 SPEED

DOWEL, DRIVE COVER

Product code: 560015
Normal Qty Required: 1

BUSH (PB CASTING) 500+535cc, E-START ONLY

BUSH, DRIVE COVER

Product code: 560005
Normal Qty Required: 1

GASKET, DRIVE COVER, ELECTRIC START MODELS 0.5mm **Standard Thickness**

GASKET, DRIVE COVER

Product code: 560014
Normal Qty Required: 1

IDLER GEAR, 500+535cc, E-START ONLY

IDLER GEAR

Product code: 560016
Normal Qty Required: 1

NEEDLE BEARING, 500+535cc, E-START ONLY

NEEDLE BEARING

Product code: 560017
Normal Qty Required: 1

GEAR, CLUTCH DRIVEN, 500+535cc, E-START ONLY

GEAR, CLUTCH DRIVEN

Product code: 550030
Normal Qty Required: 1

WASHER, THRUST, 500cc + SIXTY5 + EFI (EACH)

WASHER, THRUST, 500cc + SIXTY5 + EFI (EACH)

Product code: 560011
Normal Qty Required: 1

SPRAG CLUTCH, 500+535cc, E-START ONLY.
Sprag clutch failure is a common problem normally caused by back firing. If back firing has caused your original sprag clutch to fail you must rectify the cause of this before fitting the new unit. If a new unit is damaged because of back firing, it will not be covered under warranty.

SPRAG CLUTCH

Product code: 560010
Normal Qty Required: 1

CIRCLIP, 500+535cc, E-START ONLY

CIRCLIP

Product code: 560008
Normal Qty Required: 1

CLUTCH DRIVING GEAR, 500+535cc, E-START ONLY

CLUTCH DRIVING GEAR, 500+535cc, E-START ONLY

Product code: 112078
Normal Qty Required: 1

SHIM, CAM/SPRAG CLUTCH PLAY

** Note: FITS BETWEEN CLUTCH DRIVE GEAR AND CHAINCASE **

Product code: 560009
Normal Qty Required: 1

SPINDLE, 500+535, E-START ONLY

SPINDLE

Product code: 560018
Normal Qty Required: 1

CRANKSHAFT SPROCKET/GEAR UPTO 03/04, after 03/04 use 560018C

GEAR, CRANKSHAFT SPROCKET

Product code: 560042
Normal Qty Required: 1

SPRAG CLUTCH ASSEMBLY, 500+535cc (147873) Sprag clutch failure is a common problem normally caused by back firing. If back firing has caused your original sprag clutch to fail you must rectify the cause of this before fitting the new unit. If a new unit is damaged because of back firing, it will not be covered under warranty.

SPRAG CLUTCH WITH GEARS