Product code: 805005
Normal Qty Required: 1
CYL. BARREL, 350cc (Metric/Imperial)
CYL. BARREL, 350cc (METRIC/IMPERIAL)
Product code: 144622
Normal Qty Required: 1
GASKET, CYLINDER BARREL, 350cc (144051/510252)
GASKET, CYLINDER BASE
Product code: 146843
Normal Qty Required: 1
HEAD GASKET, COMPOSITE, 350cc
HEAD GASKET, COMPOSITE, 350CC
Product code: 33882A
Normal Qty Required: 1
CYLINDER HEAD GASKET, copper, 1mm thick
**Indian 350 Bullets only**
GASKET, CYLINDER HEAD, **SOLID COPPER**, 1mm thick (STD THICKNESS)
Product code: 33882B
Normal Qty Required: 1
CYLINDER HEAD GASKET, copper, 0.5mm thick **Indian 350cc Bullets only**
GASKET, CYLINDER HEAD, **SOLID COPPER**, 0.5mm thick (THINNER THAN STD). Please note that if fitting this gasket you need to check the height of the spigot on the cylinder barrel, as this must not bottom out on the cylinder head
Product code: 145109
Normal Qty Required: 1
STUD, M8 CYLINDER, AFTER 06/02, M8 (FROM 2BS 512943 G)
STUD, CYLINDER HEAD, M8, fits between pushrods
Product code: 140083
Normal Qty Required: 1
WASHER, 1/4'' (6mm)
WASHER, CYLINDER BASE STUD 1/4"
Product code: 145866
Normal Qty Required: 1
NUT, FLANGED M6
FLANGED HEX NUT, CYLINDER BASE STUD M6
Product code: 141060
Normal Qty Required: 1
NUT, 6mm (EACH)
NUT, M6
Product code: 141060S
Normal Qty Required: 1
NUT, 6mm, STAINLESS
** ALTERNATIVE (STAINLESS) **
Product code: 144933
Normal Qty Required: 1
ADJUSTING SCREW, PUSHROD, UK MADE, METRIC (AFTER MID 1999)
ADJUSTING SCREW, PUSHROD, METRIC
Product code: 144526
Normal Qty Required: 1
PUSHROD ASSEMBLY INLET, 350cc
PUSHROD ASSY, INLET
Product code: 144526A
Normal Qty Required: 1
PUSHROD ASSY, 211mm (ORIGINALLY THE INLET ON INDIAN 350CC BULLET), UK MADE
PUSHROD ASSY, INLET, UK MADE
Product code: 144528
Normal Qty Required: 1
PUSHROD ASSEMBLY, EXHAUST, 350cc 219MM.
PUSHROD ASSY, EXHAUST
Product code: 144528A
Normal Qty Required: 1
PUSHROD ASSY, 219mm (ORIGINALLY THE EXHAUST ON INDIAN 350CC BULLET & INLET 0N 612CC), UK MADE
PUSHROD ASSY, EXHAUST, UK MADE
Product code: 144594
Normal Qty Required: 1
ROCKER OIL FEED PIPE, AUG 1998 ONWARDS (FROM 0B 5 9478 F)
ROCKER OIL FEED PIPE,
Product code: 144593
Normal Qty Required: 1
WASHER, BANJO, (KICK START MODELS FROM 1999)
WASHER, ROCKER FEED BANJO BOLT
Product code: 144591
Normal Qty Required: 2
BANJO BOLT, AUG 1998 ON (KICKSTART), 1/2" Cycle (uses 7/16W spanner)
BANJO BOLT, ROCKER FEED
Product code: 144591S
Normal Qty Required: 2
BANJO BOLT, AUG 1998 On Kickstart models, stainless, polished head
** ALTERNATIVE (STAINLESS) **
Product code: 146910
Normal Qty Required: 1
CYLINDER BARREL and PISTON KIT, 350cc
CYLINDER BARREL & PISTON KIT
Shop for accessories at Hitchcocks Motorcycles