Product code: 28433/5/2
Normal Qty Required: 1
CLUTCH, (CAN USE 90042)
CLUTCH ASSEMBLY
Product code: 90042
Normal Qty Required: 1
CLUTCH ASSEMBLY, 4-speed
This is the same clutch as we use on our belt drive kit. However it has been specifically adapted to suit the standard chain drive. It is an economical way to get a superb clutch without the expense of the full beltdrive kit (SEE BELOW).
Product code: BELTDRIVEB
Normal Qty Required: 1
BELT DRIVE KIT, Twins + 736 Interceptor SI
A clutch that has been used and tested on high performance race machines. No slip, no drag, no more chain noise, no more adjusting the slipper. It comes with all fittings and instructions.
Product code: 140752
Normal Qty Required: 7
RIVETS (EACH), FRICTION DISC
Product code: H82K
Normal Qty Required: 1
CLUTCH FRICTION DISC, (1 pair complete with rivets). Later 7 holes type.
Product code: G66
Normal Qty Required: 15
RIVET, CLUTCH BALL CAGE.
Product code: G74
Normal Qty Required: 1
CLUTCH BALL CAGE (1 PAIR).
Product code: H72
Normal Qty Required: 1
CIRCLIP, CLUTCH SPROCKET.
Product code: 200400
Normal Qty Required: 1
CLUTCH CENTRE ASSY., 4 SPEED, 350cc (AFTER 09/98) & 500cc INDIAN BUILT BULLETS
CLUTCH CENTRE ASSY (CUSH DRIVE) Complete with rubbers and centre. Indian made
Product code: VR68/5
Normal Qty Required: 1
CLUTCH CENTRE DRUM AND BACKPLATE. This uses the short distance tubes and is for the ball bearing style clutch basket)
Product code: 144459
Normal Qty Required: 1
CLUTCH PLATE, SEGMENT TYPE (144278, H89K)
Product code: H89CB
Normal Qty Required: 3
CLUTCH PLATE, BONDED (142mm od x 90mm id with 10 tangs)
Product code: VR72/1
Normal Qty Required: 3
SPACER, CLUTCH PRESSURE PLATE, 3/4'' long
Product code: G69/5
Normal Qty Required: 1
CLUTCH CENTRE
Product code: G70/5
Normal Qty Required: 3
CUSH RUBBER, CLUTCH (LARGE) 4 plate clutch (1.20" long), (EACH)
Product code: G70A/5
Normal Qty Required: 3
CUSH RUBBER, CLUTCH (SMALL) 4 plate clutch (1.20" long) , (EACH)
Product code: G71
Normal Qty Required: 1
CLUTCH RETAINING PLATE
Product code: 29818
Normal Qty Required: 3
CLUTCH SPRING (light).(144138).
CLUTCH SPRING (light)
Product code: ST181
Normal Qty Required: 3
CLUTCH SPRING
CLUTCH SPRING, Heavy
Product code: G80
Normal Qty Required: 3
CLUTCH SPRING SCREW, 1/4'' BSF
Product code: TR77
Normal Qty Required: 1
CLUTCH FRONT PLATE (can use TR77A + extend rod by 1/4")
Product code: TR77A
Normal Qty Required: 1
CLUTCH FRONT PLATE with spring grooves
This can replace the standard front plate (TR77), but will require a slightly longer clutch pushrod.
Product code: G75
Normal Qty Required: 1
CLUTCH PLATE (FLAT)
Product code: G75A
Normal Qty Required: 1
STEEL CLUTCH PLATE (DISHED)
Product code: TR79
Normal Qty Required: 1
PRESSURE PLATE
Product code: G2/41/1
Normal Qty Required: 1
CLUTCH LEVER
Product code: G2/13
Normal Qty Required: 1
PIN, CLUTCH LEVER CAP
Product code: H44/1
Normal Qty Required: 1
CLUTCH ADJUSTER WITH BALL and NUT
Product code: H66/1008
Normal Qty Required: 1
CLUTCH ROD, 10.1/2"
Product code: TC/PZ6
Normal Qty Required: 1
GREASE NIPPLE (EACH)
Product code: 27535G25K
Normal Qty Required: 1
CLUTCH SPROCKET/DRUM, 500-700
Product code: G76
Normal Qty Required: 54
BALL BEARING, 3/16'' (32017)
Shop for accessories at Hitchcocks Motorcycles