Product code: 48007
Normal Qty Required: 1
INDUCTION PIPE WITH BANJOS
INDUCTION PIPE
Product code: 37000/A
Normal Qty Required: 2
BANJO BOLT, BSF
BREATHER BANJO BOLT, BSF
Product code: 13785
Normal Qty Required: 4
FIBRE WASHER, 3/8'' (EACH)
FIBRE WASHER, 3/8
Product code: 48010
Normal Qty Required: 2
INDUCTION PIPE INSERT
Product code: AM/46191/30
Normal Qty Required: 2
HEAT INSULATOR, 30mm (1.3/16 inch), 3mm THICK
CARB SPACER WASHER, 30mm
Product code: 42518
Normal Qty Required: 2
GASKET, CARBURETTOR FLANGE
Product code: 43004
Normal Qty Required: 4
STUD, 5/16" x 1.1/4" BSF
CARBURETTER STUD
Product code: 27944
Normal Qty Required: 4
NUT, 5/16 BSF (EACH)
NUT, 5/16 BSF, bar turned
Product code: 27944S
Normal Qty Required: 4
NUT, 5/16 BSF, BAR TURNED, stainless
** ALTERNATIVE (STAINLESS) **
Product code: 27917
Normal Qty Required: 4
WASHER, SHAKEPROOF, 5/16'' (EACH)
SHAKEPROOF WASHER
Product code: 98011/1
Normal Qty Required: 4
RECOIL INSERTS, 5/16 X 26 CYCLE, 1.5D (EACH)
INSERT, 5/16 X 26TPI
Product code: 46158
Normal Qty Required: 1
L/H CYLINDER HEAD - early type - no balance pipe drilling
L/H CYLINDER HEAD
Product code: 45447
Normal Qty Required: 4
DOWEL, CYLINDER HEAD
CYLINDER HEAD DOWEL
Product code: 46184
Normal Qty Required: 2
CROSS RING Std, EACH (Revised without split)
CROSS RING Std, EACH (Revised without split)
Product code: 46184/20
Normal Qty Required: 2
CROSS RING +20, EACH (Revised without split)
Product code: 46184/40
Normal Qty Required: 2
CROSS RING +40, EACH (Revised without split)
Product code: 46184/60
Normal Qty Required: 2
CROSS RING +60, EACH (Revised without split)
CROSS RING +60, EACH (Revised without split)
Product code: 35780
Normal Qty Required: 4
STUD, 5/16" x 13/16" BSF, HEAD STEADY
STUD, CYLINDER HEAD STEADY
Product code: 27621
Normal Qty Required: 4
NUT, 5/16 BSF , THICK (EACH)
STUD NUT, 5/16 BSF (DEEP)
Product code: 27621S
Normal Qty Required: 4
NUT, 5/16 BSF (DEEP), stainless
** ALTERNATIVE (STAINLESS) **
Product code: 8634
Normal Qty Required: 4
WASHER, FLAT 5/16'' (EACH)
FLAT WASHER, 5/16
Product code: 8634S
Normal Qty Required: 4
WASHER, FLAT, 5/16'', STAINLESS
WASHER, FLAT, 5/16'', STAINLESS
Product code: 27917
Normal Qty Required: 4
WASHER, SHAKEPROOF, 5/16'' (EACH)
SHAKEPROOF WASHER
Product code: 32552
Normal Qty Required: 4
ROCKERBOX COVER
Product code: 32553
Normal Qty Required: 4
ROCKER COVER GASKET
Product code: 32553A
Normal Qty Required: 1
ROCKER COVER GASKET, 2mm cork
ROCKER COVER GASKET, made from 2mm cork for better sealing
Product code: 48011
Normal Qty Required: 16
STUD, 1/4" x 15/16" x 26tpi/WHIT, ROCKER COVER
ROCKER COVER STUD
Product code: 48011/OS
Normal Qty Required: 16
STUD, ROCKER COVER. This stud has an oversize 5/16" BSW thread on one end and the standard 1/4" BSF thread at the other.
STUD, ROCKER COVER. This stud has an oversize 5/16" BSW thread on one end and the standard 1/4" BSF thread at the other.
Product code: 37852
Normal Qty Required: 16
NUT, ROCKER COVER, SHOULDERED
ROCKER COVER NUT
Product code: 37852S
Normal Qty Required: 16
NUT, ROCKER COVER, *stainless*
** ALTERNATIVE (STAINLESS) **
Product code: 82
Normal Qty Required: 16
WASHER, FLAT, 1/4''
FLAT WASHER, 1/4
Product code: 39735
Normal Qty Required: 2
ROCKER (R/H INLET OR L/H EXHAUST)
ROCKER (R/H INLET+L/H EXHAUST)
Product code: 39736
Normal Qty Required: 2
ROCKER (L/H INLET OR R/H EXHAUST)
Rocker inlet left hand, exhaust right hand
Product code: 32550
Normal Qty Required: 4
ROCKER ADJUSTING SCREW 5/16'' X 26TPI
ROCKER ADJUSTING SCREW
Product code: 32549
Normal Qty Required: 4
NUT, ROCKER ADJUSTER, 5/16 X 26TPI
ROCKER ADJUSTER LOCKNUT
Product code: 38644
Normal Qty Required: 4
SPINDLE, ROCKER
ROCKER SPINDLE
Product code: 36985
Normal Qty Required: 4
ROCKER SPINDLE END PLUG
ROCKER SPINDLE END PLUG
Product code: 39468
Normal Qty Required: 4
COPPER WASHER for rocker spindle + other applications
Product code: 32554
Normal Qty Required: 4
ROCKER SPINDLE THRUST WASHER
Product code: 35904
Normal Qty Required: 4
SPRING WASHER (9/16'')
Product code: 43521
Normal Qty Required: 2
EXHAUST VALVE
FOR USE WITH **ALLOY** VALVE SPRING TOP COLLARS
EXHAUST VALVE
Product code: 42661
Normal Qty Required: 2
INLET VALVE
FOR USE WITH **ALLOY** VALVE SPRING TOP COLLARS
INLET VALVE
Product code: 42660
Normal Qty Required: 2
VALVE GUIDE, 0.627" (Standard size)
Product code: 42660/10
Normal Qty Required: 1
VALVE GUIDE, 0.637" (Oversize by 0.010'')
VALVE GUIDE, 0.010 INCH OVERSIZE
Product code: 42660/3
Normal Qty Required: 1
VALVE GUIDE, 0.630" (Oversize by 0.003'')
VALVE GUIDE, 0.003 INCH OVERSIZE
Product code: 42660/5
Normal Qty Required: 1
VALVE GUIDE, 0.632" (Oversize by 0.005'')
VALVE GUIDE, 0.005 INCH OVERSIZE
Product code: VS538
Normal Qty Required: 2
VALVE SPRING SET, 4 springs, (42692/3) For late valves with groove for split collars **For twins order 2 sets**
VALVE SPRING SET (4 SPRINGS FOR 1 HEAD)
Product code: 42651
Normal Qty Required: 4
VALVE SPRING COLLAR,TOP (For late valves with groove for split collars)
Product code: 42652
Normal Qty Required: 4
VALVE SPRING COLLAR, BOTTOM (For late valves with groove for split collars)
Product code: 42492
Normal Qty Required: 4
VALVE SPLIT COLLAR (ORDER 1 PER VALVE), late type *These should be split before use*
VALVE SPLIT COLLAR (1 NEEDED PER VALVE)
Product code: 46129
Normal Qty Required: 2
CYLINDER BARREL, 736 INTERCEPTOR (For use with cross rings)
Product code: 46129B
Normal Qty Required: 2
CYLINDER BARREL, 736 INTERCEPTOR (For use with 46129C head gaskets)
CYLINDER BARREL, INTERCEPTOR (For use with 46129C head gaskets)
Product code: 46129C
Normal Qty Required: 1
HEAD GASKET, 736 INTERCEPTOR (For use with cylinders without taper for crossings) **SOLD AS PAIR** composite
Product code: 45450
Normal Qty Required: 1
CYLINDER BASE GASKET
Cylinder base gasket
Product code: 46193
Normal Qty Required: 2
COMPRESSION PLATE
Product code: 49740
Normal Qty Required: 4
PUSHROD TUNNEL OIL SEAL (46150)
PUSH ROD TUNNEL OIL SEAL (46150)
Product code: 240
Normal Qty Required: 1
GASKET SET, 736 INTERCEPTOR SII 1969-on, 736 RICKMAN INTERCEPTOR (ALL)
COMPLETE GASKET SET
Product code: SEALSET10
Normal Qty Required: 1
SEALSET, 13 SEALS, 736 INTERCEPTOR SII (1969-on), 736 RICKMAN INTERCEPTOR (ALL)
SEALSET FOR ENGINE/GEARBOX/PRIMARY (13 seals)
Shop for accessories at Hitchcocks Motorcycles