Product code: 44612
Normal Qty Required: 1
CHAINSTAY (SWINGING ARM) Approx dimensions: 8.2'' wide at pivot end, 8.1'' between flanges for wheel.
SWINGING ARM ASSY (FITTED UPTO FRAME NUMBER 10347)
Product code: 33785
Normal Qty Required: 2
SWINGING ARM BUSH (TO SUIT .842 TUBE)
SWINGING ARM BUSH (FITTED UPTO FRAME NUMBER 10347)
Product code: 41367
Normal Qty Required: 1
CHAINSTAY BEARING TUBE 0.841-0.842"
SWINGING ARM BEARING TUBE (FITTED UPTO FRAME NUMBER 10347)
Product code: 39136
Normal Qty Required: 1
CHAINSTAY BEARING STUD
9.7/8" x 9/16" diameter
SWINGING ARM BEARING STUD (FITTED UPTO FRAME NUMBER 10347)
Product code: 38894
Normal Qty Required: 2
NUT, SWINGING ARM, 9/16'' X 26TPI, STAINLESS
NUT, SWINGING ARM, 9/16'' X 26TPI
Product code: 45703
Normal Qty Required: 1
SCREW, CHAIN STAY NUT LOCKING, 5/16" bsf
SWINGING ARM NUT LOCKING SCREW
Product code: 33787
Normal Qty Required: 2
THRUST WASHER, SWINGING ARM
SWINGING ARM THRUST WASHER (FITTED UPTO FRAME NUMBER 10347)
Product code: 37770
Normal Qty Required: 2
S/ARM DUST EXCLUDER RUBBER, (39816)
SWINGING ARM DUST EXCLUDER RUBBER (FITTED UPTO FRAME NUMBER 10347)
Product code: TC/PZ6
Normal Qty Required: 2
GREASE NIPPLE (EACH)
SWINGING ARM GREASE NIPPLE (FITTED UPTO FRAME NUMBER 10347)
Product code: GR/SB3/227
Normal Qty Required: 1
REAR SHOCK ABSORBERS (290mm), PAIR, FULLY ENCLOSED, HAGON
SUSPENSION UNITS, 290mm, HAGON, FULLY ENCLOSED, PAIR
Product code: 200042
Normal Qty Required: 1
SHOCK ABSORBER COVERS, CHROME/BLACK (SET OF 4)
CHROME/BLACK SPRING COVERS (SET OF 4)
Product code: AR/AT6/333
Normal Qty Required: 4
TOP SPRING ABUTMENT (one piece)
SUSPENSION SPRING ABUTMENT
Product code: 39985
Normal Qty Required: 2
SUSPENSION SPRING
SUSPENSION SPRING
Product code: GR/9054/316H
Normal Qty Required: 4
BUSH, REAR SHOCK ABSORBER (EACH)
REAR SHOCK BUSH
Product code: 45975
Normal Qty Required: 2
BOLT, 3/8 BSF X 2.125
SUSPENSION PIVOT PIN (TOP), 3/8 BSF X 2.125
Product code: 45899
Normal Qty Required: 2
NUT, REAR SHOCK
SUSPENSION PIVOT PIN NUT (TOP)
Product code: 46504
Normal Qty Required: 2
LOCKWASHER
SUSPENSION PIVOT PIN LOCKWASHER (TOP)
Product code: 46204
Normal Qty Required: 1
REAR MUDGUARD, BATHTUB TYPE **fiberglass**
REAR MUDGUARD, BATHTUB TYPE
Product code: 45895
Normal Qty Required: 1
MUDGUARD
MUDGUARD (FRONT SECTION)
Product code: 45887
Normal Qty Required: 1
MUDGUARD CARRIER, BATHTUB, painted black
MUDGUARD CARRIER, BATHTUB
Product code: 45904
Normal Qty Required: 2
LIFTING HANDLE
LIFTING HANDLE
Product code: 45930
Normal Qty Required: 4
GROMMET, LIFTING HANDLE (Not as original but do the job) 20 MM
LIFTING HANDLE GROMMET
Product code: 45957
Normal Qty Required: 1
REAR NUMBER PLATE, (BATHTUB)
REAR NUMBER PLATE, (BATHTUB)
Product code: 41244
Normal Qty Required: 1
TOOLBOX or NUMBER PLATE BEADING (141844)
TOOLBOX or NUMBER PLATE BEADING (141844)
Product code: 16284
Normal Qty Required: 1
BOLT, 5/16 X 17/32 X 26TPI
REAR NUMBER PLATE BOLT
Product code: 251
Normal Qty Required: 2
BOLT, 1/4'' X 1/2'' X 26TPI (EACH)
MUDGUARD BOLT, 1/4 X 1/2 X 26
Product code: 26998
Normal Qty Required: 4
NUT, 1/4'' X 26tpi (EACH)
NUT 1/4" X 26tpi
Product code: 26998S
Normal Qty Required: 4
NUT, 1/4'', BAR TURNED, stainless (THICK)
** ALTERNATIVE (STAINLESS) **
Product code: 82
Normal Qty Required: 4
WASHER, FLAT, 1/4''
WASHER, FLAT 1/4"
Product code: DE394
Normal Qty Required: 4
NUT, 3/8" BSF
NUT 3/8 BSF, bar turned
Product code: DE394S
Normal Qty Required: 4
NUT, 3/8" BSF, stainless
** ALTERNATIVE (STAINLESS) **
Product code: 33783
Normal Qty Required: 2
WASHER, REAR SHOCK PIVOT PIN "D" Internal hole
SUSPENSION PIVOT PIN WASHER (BOTTOM)
Product code: DE394
Normal Qty Required: 2
NUT, 3/8" BSF
NUT 3/8 BSF, bar turned
Product code: DE394S
Normal Qty Required: 2
NUT, 3/8" BSF, stainless
** ALTERNATIVE (STAINLESS) **
Product code: 46678
Normal Qty Required: 1
EARTH STRAP
EARTH STRAP
Product code: 46264
Normal Qty Required: 2
NUT, SWINGING ARM, polished stainless, 1/2'' X 26TPI (111810S)
NUT, SWINGING ARM, polished stainless, 1/2'' X 26TPI
Product code: 46263
Normal Qty Required: 1
STUD, 1/2" x 9.7/8" x 26tpi, SWINGING ARM BEARING
SWINGING ARM BEARING STUD (FITTED FROM FRAME NUMBER 10347)
Product code: 46265
Normal Qty Required: 2
SWINGING ARM COLLAR *UK MADE*
SWINGING ARM THRUST WASHER (FITTED FROM FRAME NUMBER 10347)
Product code: 46262
Normal Qty Required: 2
SWINGING ARM BUSH, EACH
SWINGING ARM BUSH, EACH (FITTED FROM FRAME NUMBER 10347)
Product code: 46266
Normal Qty Required: 1
SWINGING ARM DIST TUBE
SWINGING ARM DIST TUBE (FITTED FROM FRAME NUMBER 10347)
Shop for accessories at Hitchcocks Motorcycles