Product code: LU/54410823
Normal Qty Required: 1
CONDENSER, 18D2
CONDENSOR
Product code: LU/425219
Normal Qty Required: 1
CONTACT SET (LATE DISTRIBUTOR)
CONTACT SET
Product code: LU/423486
Normal Qty Required: 1
ROTOR ARM
Product code: LU/425049
Normal Qty Required: 1
DISTRIBUTOR COVER (18D2)
Product code: LU/421863
Normal Qty Required: 2
IGNITION COIL HT LEAD CLIP
HT LEAD CLIP
Product code: LU/40610A
Normal Qty Required: 1
DISTRIBUTOR
DISTRIBUTOR COMPLETE
Product code: LU/421554
Normal Qty Required: 2
IGNITION COIL RUBBER COVER
HT LEAD RUBBER COVER
Product code: 44047
Normal Qty Required: 1
DISTRIBUTOR ADAPTOR
Product code: 40377
Normal Qty Required: 1
DISTRIBUTOR MOUNTING GASKET
Product code: LU/420151
Normal Qty Required: 1
CLAMP PLATE ( USED )
Product code: LU/47164
Normal Qty Required: 1
STATOR 6v for 2.15/16" diameter rotors *Indian made* 3 wire (141721)
STATOR 6v for 2.15/16" diameter rotors *Indian made* (3 wire)
Product code: LU/47204
Normal Qty Required: 1
STATOR 6v for 2.15/16" diameter rotors *LUCAS* (3 wire)
Product code: LU/54213901
Normal Qty Required: 1
ROTOR (LUCAS), 2.15/16, (54202299)
ROTOR (LUCAS), 2.15/16, Please check the diameter of your exsisting rotor
Product code: 43385
Normal Qty Required: 1
ROTOR SLEEVE, FOR 7/16'' BOLT
ROTOR SLEEVE
Product code: LU/47132A
Normal Qty Required: 1
RECTIFIER, GENUINE LUCAS, NOS
RECTIFIER, 6VOLT. SQUARE, 4 PLATE (USE SOLID STATE RECTFIER, PART #: RECTIFIER)
Product code: RECTIFIER
Normal Qty Required: 1
SOLID STATE RECTIFIER
Product code: 1444
Normal Qty Required: 1
HORN/DIP SWITCH SUB HARNESS
Product code: LU/54953386
Normal Qty Required: 1
WIRING SUB HARNESS , TAIL LAMP
WIRING SUB HARNESS , TAIL LAMP
Product code: 1646
Normal Qty Required: 1
WIRING HARNESS, MAIN, COIL IGNITION
This is the early style harness which uses LU/34093B ignition switch with screw on terminals. It will need modifying to fit later style ignition switch
Product code: LU/069343
Normal Qty Required: 1
HORN (6V), LUCAS ALTETTE, PATTERN
HORN, (6V) LUCAS ALTETTE
Product code: LU/700168
Normal Qty Required: 1
HORN BRACKET
Product code: 45549
Normal Qty Required: 1
HORN LOCKING PLATE
Product code: 35949
Normal Qty Required: 1
HORN PACKING COLLAR
Product code: LU/76204A
Normal Qty Required: 1
HORN PUSH (or ENGINE STOP) SWITCH, 7/8"
HORN PUSH SWITCH
Product code: LU/380521
Normal Qty Required: 1
DIP SWITCH, LUCAS PATTERN (1940s/50s)
DIPPER SWITCH, REPLICA
Product code: COILCLIP1
Normal Qty Required: 1
COIL SADDLE BRACKET, 48.5mm
Product code: LU/45152B
Normal Qty Required: 1
IGNITION COIL 6volt (LUCAS), **DOES NOT INCLUDE CLAMP**
Product code: 27944
Normal Qty Required: 1
NUT, 5/16 BSF (EACH)
Product code: 27944S
Normal Qty Required: 1
NUT, 5/16 BSF, BAR TURNED, stainless
** ALTERNATIVE (STAINLESS) **
Product code: 92048
Normal Qty Required: 1
IGNITION SWITCH PLATE with engraving
IGNITION SWITCH PLATE WITH ENGRAVING
Product code: LU/34093B
Normal Qty Required: 1
IGNITION SWITCH WITH KEY, Pattern (142565)
This is the early style where the wiring screws on to the terminals
Product code: LU/34427
Normal Qty Required: 1
IGNITION SWITCH WITH KEY (LUCAS 88SA STYLE)
This is the later style which uses a plug on socket
Shop for accessories at Hitchcocks Motorcycles