Product code: 21322
Normal Qty Required: 1
VALVE GUIDE, 0.623-0.624" (Standard size) Iron LONG
Product code: 39629
Normal Qty Required: 1
CYLINDER HEAD, *USED* CAST IRON, CRUSADER, WILL HAVE 1 - 2 BROKEN FINS, CONDITION 6/10.
Product code: 38875
Normal Qty Required: 1
CYLINDER HEAD GASKET (EARLY)
Product code: 35392
Normal Qty Required: 1
EXHAUST VALVE (350B UP TO 1959)
FOR USE WITH **STEEL** VALVE SPRING TOP COLLARS
Product code: 39156
Normal Qty Required: 1
INLET VALVE FOR USE WITH **STEEL** VALVE SPRING TOP COLLARS
Product code: 22641
Normal Qty Required: 1
VALVE GUIDE, 0.623-0.624" (Standard size) Iron
Product code: VS494
Normal Qty Required: 1
VALVE SPRING SET, 4 springs, (39659/60) For early valves with taper for split collars
Product code: 35238
Normal Qty Required: 2
VALVE SPRING COLLAR, TOP (For early valves with taper for split collars)
Product code: 33508
Normal Qty Required: 2
VALVE SPRING COLLAR, BOTTOM (For early valves with taper for split collars)
Product code: 11099
Normal Qty Required: 2
VALVE SPLIT COLLAR , ORDER 1 PER VALVE (2 Halves)
Product code: 10672
Normal Qty Required: 2
CAP, VALVE STEM *sold individually*
Product code: 39159
Normal Qty Required: 1
EXHAUST ROCKER (or inlet on Crusader) Indian made
Product code: 39158
Normal Qty Required: 1
INLET ROCKER, (or exhaust on Crusader) Indian made
Product code: 38518/20
Normal Qty Required: 1
ROCKER BEARING EXHAUST, (or inlet on Crusader)
Product code: 38519/21
Normal Qty Required: 1
ROCKER BEARING INLET, (or exhaust on Crusader)
Product code: 38874
Normal Qty Required: 2
ROCKER BEARING PLATE ** used **
Product code: 16982
Normal Qty Required: 8
STUD, 1/4" x 2.1/8" x 26tpi, ROCKER BEARING
Product code: 27305
Normal Qty Required: 8
ROCKER BEARING NUT, SMALL HEX
Product code: 9908
Normal Qty Required: 8
WASHER, ROCKER + MANIFOLD
Product code: 38872
Normal Qty Required: 1
GASKET,ROCKER COVER.
Product code: 42854
Normal Qty Required: 1
ROCKER COVER CENTRE STUD, SHOULDERED FOR EARLY MODELS
Product code: 1846
Normal Qty Required: 1
WASHER, ROCKER STUD
Product code: 35470
Normal Qty Required: 2
STUD, 5/16" x 1.3/16" x 26tpi, CARBURETTER
Product code: 27001
Normal Qty Required: 2
NUT, SHOULDERED 5/16 X 26tpi (EACH)
Product code: 27917
Normal Qty Required: 2
WASHER, SHAKEPROOF, 5/16'' (EACH)
Product code: 39346
Normal Qty Required: 4
STUD, 5/16" x 6.5/8" BSF, CYLINDER HEAD, LONG
Product code: 33036
Normal Qty Required: 4
CRUSADER HEAD STUD NUT, 5/16" BSF
Product code: 90120
Normal Qty Required: 4
WASHER, CYLINDER HEAD INTERNAL (SMALL O/D), 2.5mm HARDENED
Product code: 39345
Normal Qty Required: 1
STUD, 5/16" x 5.5/16" BSF, CYLINDER HEAD, SHORT
Product code: 27621
Normal Qty Required: 1
NUT, 5/16 BSF , THICK (EACH)
Product code: 27621S
Normal Qty Required: 1
NUT, 5/16 BSF (DEEP), stainless
** ALTERNATIVE (STAINLESS) **
Product code: 8634
Normal Qty Required: 1
WASHER, FLAT 5/16'' (EACH)
Product code: 8634S
Normal Qty Required: 1
WASHER, FLAT, 5/16'', STAINLESS
WASHER, FLAT, 5/16'', STAINLESS
Product code: 38865
Normal Qty Required: 1
CYLINDER BARREL, CRUSADER(EARLY), **USED**, CONDITION 7/10 - NO BROKEN FINS, LOW BORE BUT WILL REQUIRE REBORING, Note: The type with NO allen screws in the p/rod tunnels
Product code: 39037
Normal Qty Required: 1
CYLINDER BASE GASKET
Product code: 47524
Normal Qty Required: 1
COMPRESSION PLATE, 1mm (0.040") thick (250cc range) ** OPTIONAL **
COMPRESSION PLATE, 1mm (0.040") thick (If required)
Product code: ROCKERSET
Normal Qty Required: 1
ALLOY/STEEL ROCKER SET, (Inlet and Exhaust) SUPPLIED COMPLETE WITH O RINGS Made by Parado
Product code: 418ENFA
Normal Qty Required: 1
GASKET SET, 250cc CLIPPER 1957-59 and CRUSADER 1957-59, 250cc FIRE ARROW 1958, 250cc HOUNDS ARROW 1958
Product code: SEALSET1
Normal Qty Required: 1
SEALSET, 9 SEALS, 250cc CLIPPER 1958-66, CRUSADER RANGE 1958-67 AND 350cc BULLET (UNIT CONSTRUCTION) 1963, 250cc FIRE ARROW 1958, 250cc HOUNDS ARROW 1958
Shop for accessories at Hitchcocks Motorcycles