Product code: 200160N
Normal Qty Required: 1
CRANKSHAFT (Improved English made), 350cc BULLET (1951) with taper engine sprocket shaft
Product code: 32323
Normal Qty Required: 1
CON ROD, ALLOY (Can use improved forged steel conrod, part 22646)
Product code: 22646
Normal Qty Required: 1
CON ROD (FORGED STEEL) G, CO, J, EARLY BULLET
Product code: 16651
Normal Qty Required: 1
CONNECTING ROD FIXED BUSH (Must be honed after fitting to conrod)
Product code: 19885
Normal Qty Required: 1
BIG END FLOATING BUSH
Product code: 37715
Normal Qty Required: 1
CRANKPIN, (CAN USE RE8)
Product code: 16476
Normal Qty Required: 2
SCREW, OIL PLUG or BIG END, 1/4'' BSF x 0.250'' long
Product code: 26707
Normal Qty Required: 2
THRUST WASHER, CRANKPIN, EACH
Product code: 26839
Normal Qty Required: 1
GRUB SCREW, CRANKPIN PLUG
Product code: 30406
Normal Qty Required: 1
FLYWHEEL (DRIVE SIDE), 350 MODEL G & EARLY 350 BULLET, **USED**, CONDITION 5/10
Product code: 32433
Normal Qty Required: 1
FLYWHEEL (TIMING SIDE), 350 MODEL G & EARLY 350 BULLET, **USED**, CONDITION 6/10
Product code: 32309
Normal Qty Required: 1
DRIVE SHAFT
Product code: 32313
Normal Qty Required: 1
WASHER, DRIVE SIDE THRUST
Product code: 32314
Normal Qty Required: 1
ENGINE SPROCKET 25T, TAPERED (STANDARD)
Product code: 33773
Normal Qty Required: 1
ENGINE SPROCKET 19T, TAPERED
Product code: 33774
Normal Qty Required: 1
ENGINE SPROCKET 20T, TAPERED
Product code: 34037
Normal Qty Required: 1
DRIVE SHAFT BREATHER NUT
Product code: 35117
Normal Qty Required: 1
BREATHER CORK SEAL
Product code: 35118
Normal Qty Required: 1
WASHER, CHAINCASE SEAL
Product code: 32434
Normal Qty Required: 1
TIMING SIDE SHAFT
Product code: 23698
Normal Qty Required: 1
THRUST WASHER, 0.07'', ALTERNATIVE SIZES AVAILABLE ( 0.05'' or 0.06'')
Product code: 26703
Normal Qty Required: 1
RELEASE PLUG (T/S SHAFT)
Product code: 26704
Normal Qty Required: 1
SPRING, RELEASE PLUG (TS SHAFT)
Product code: 32019
Normal Qty Required: 1
5/16'' BALL BEARING
Product code: 8718
Normal Qty Required: 2
SCREW,SHAFT NUT KEEPER.(SAMPLE ONLY)
Product code: 36017
Normal Qty Required: 1
BUSH, SMALL END FOR ALLOY ROD (NOT FITTED AS STANDARD)
Product code: RE8
Normal Qty Required: 1
ROLLER BIG END ASSEMBLY (Model G, CO, C +1949-55 BULLETS) - This is supplied with the crankpin, nuts, rollers. roller cage and fixed bush, please order thrust washers (2x26707) and other parts if required)
Shop for accessories at Hitchcocks Motorcycles