Product code: 45693
Normal Qty Required: 1
CYLINDER HEAD (15/16'')
CYLINDER HEAD (2 pushrod tunel screws type)
Product code: 45701
Normal Qty Required: 1
CYLINDER HEAD GASKET (SOLID)
Product code: 45701A
Normal Qty Required: 1
CYLINDER HEAD GASKET, 250cc, MODERN IMPROVED AMERICAN MADE COMPOSITE GASKET (with fire ring), CAN BE USED AS AN ALTERNATIVE TO 45701
Product code: 35392
Normal Qty Required: 1
EXHAUST VALVE (350B UP TO 1959)
FOR USE WITH **STEEL** VALVE SPRING TOP COLLARS
EXHAUST VALVE
Product code: 39156
Normal Qty Required: 1
INLET VALVE FOR USE WITH **STEEL** VALVE SPRING TOP COLLARS
INLET VALVE
Product code: 25524
Normal Qty Required: 1
VALVE GUIDE, 0.627" (Standard size), ENGLISH MADE
VALVE GUIDE, INLET, STANDARD
Product code: 25524/10
Normal Qty Required: 1
VALVE GUIDE, 0.637" (Oversize by 0.010''), ENGLISH MADE
VALVE GUIDE, INLET, 0.010 inch oversize
Product code: 25524/3
Normal Qty Required: 1
VALVE GUIDE, 0.630" (Oversize by 0.003''), ENGLISH MADE
VALVE GUIDE, INLET, 0.003 inch oversize
Product code: 25524/5
Normal Qty Required: 1
VALVE GUIDE, 0.632" (Oversize by 0.005''), ENGLISH MADE
VALVE GUIDE, INLET, 0.005 inch oversize
Product code: 44045
Normal Qty Required: 1
VALVE GUIDE, 0.627" (Standard size) EXHAUST
VALVE GUIDE, EXHAUST, STANDARD
Product code: 44045/3
Normal Qty Required: 1
VALVE GUIDE, 0.630" (Oversize by 0.003'') EXHAUST
VALVE GUIDE, EXHAUST, 0.003 inch oversize
Product code: VS494
Normal Qty Required: 1
VALVE SPRING SET, 4 springs, (39659/60) For early valves with taper for split collars
V/SPRING (39659/60) 4 SPRINGS
Product code: 35238
Normal Qty Required: 2
VALVE SPRING COLLAR, TOP (For early valves with taper for split collars)
VALVE SPRING COLLAR (TOP), STEEL
Product code: 33508
Normal Qty Required: 2
VALVE SPRING COLLAR, BOTTOM (For early valves with taper for split collars)
VALVE SPRING COLLAR (BOTTOM)
Product code: 11099
Normal Qty Required: 2
VALVE SPLIT COLLAR , ORDER 1 PER VALVE (2 Halves)
VALVE SPLIT COLLAR (1 NEEDED PER VALVE) Early type
Product code: 10672
Normal Qty Required: 2
CAP, VALVE STEM *sold individually*
VALVE STEM CAP, PLEASE NOTE THAT THESE END CAPS ARE ONLY FITTED WITH VALVES THAT USE STEEL VALVE SPRING TOP COLLARS, IF YOU HAVE ALLOY TOP SPRING COLLARS, THEN PLEASE SEE THE CRUSADER SPORTS BOOK
Product code: 45233
Normal Qty Required: 1
ROCKER HOUSING (ALSO 45233A)
ROCKER HOUSING
Product code: 45233A
Normal Qty Required: 1
ROCKER ASSEMBLY (250), COMPLETE
Product code: 27305
Normal Qty Required: 4
ROCKER BEARING NUT, SMALL HEX
Product code: 32402
Normal Qty Required: 4
STUD, 1/4'' X 2.1/16'' X 26TPI (13601)
ROCKER HOUSING STUD (13601)
Product code: 9908
Normal Qty Required: 4
WASHER, ROCKER + MANIFOLD
ROCKER STUD WASHER
Product code: 45351
Normal Qty Required: 2
ROCKER SPINDLE
Product code: 45349
Normal Qty Required: 2
ROCKER ARM (PUSHROD END)
ROCKER ARM (PUSH ROD END)
Product code: 45350
Normal Qty Required: 2
ROCKER ARM (VALVE END)
Product code: 45249
Normal Qty Required: 2
ROCKER SPINDLE SPRING WASHER (11/16'')
Product code: 3570
Normal Qty Required: 4
NUT, 7/16 X 26TPI
Product code: 4501
Normal Qty Required: 4
ROCKER SPINDLE WASHER
Product code: 45800
Normal Qty Required: 1
ROCKER COVER
ROCKER COVER **USED**
Product code: 38872
Normal Qty Required: 1
GASKET,ROCKER COVER.
Product code: 45648
Normal Qty Required: 1
STUD, 5/16" x 2.3/8" x 26tpi, ROCKER COVER (250's)
ROCKER COVER CENTRE STUD
Product code: 45801
Normal Qty Required: 1
ROCKER COVER STUD NUT
ROCKER COVER STUD SHOULDERED NUT
Product code: 1846
Normal Qty Required: 1
WASHER, ROCKER STUD
ROCKER STUD WASHER
Product code: 35470
Normal Qty Required: 2
STUD, 5/16" x 1.3/16" x 26tpi, CARBURETTER
CARB STUD
Product code: 27001
Normal Qty Required: 2
NUT, SHOULDERED 5/16 X 26tpi (EACH)
Product code: 27917
Normal Qty Required: 2
WASHER, SHAKEPROOF, 5/16'' (EACH)
SHAKEPROOF WASHER, 5/16
Product code: 44026
Normal Qty Required: 2
PUSHROD TUNNEL ALLEN SCREW (countersunk)
PUSH ROD TUNNEL ALLEN SCREW
Product code: 39346
Normal Qty Required: 4
STUD, 5/16" x 6.5/8" BSF, CYLINDER HEAD, LONG
CYL. HEAD STUD, LONG, 6.5/8
Product code: 33036
Normal Qty Required: 4
CRUSADER HEAD STUD NUT, 5/16" BSF
CRUSADER HEAD STUD NUT
Product code: 90120
Normal Qty Required: 4
WASHER, CYLINDER HEAD INTERNAL (SMALL O/D), 2.5mm HARDENED
WASHER, CYLINDER HEAD, REDUCED OD
Product code: 39345
Normal Qty Required: 1
STUD, 5/16" x 5.5/16" BSF, CYLINDER HEAD, SHORT
CYLINDER HEAD STUD, SHORT, 5.1/4
Product code: 27621
Normal Qty Required: 1
NUT, 5/16 BSF , THICK (EACH)
STUD NUT, 5/16 BSF (DEEP)
Product code: 27621S
Normal Qty Required: 1
NUT, 5/16 BSF (DEEP), stainless
** ALTERNATIVE (STAINLESS) **
Product code: 8634
Normal Qty Required: 1
WASHER, FLAT 5/16'' (EACH)
WASHER, FLAT 5/16
Product code: 8634S
Normal Qty Required: 1
WASHER, FLAT, 5/16'', STAINLESS
** ALTERNATIVE (STAINLESS) **
Product code: 45275
Normal Qty Required: 1
CYLINDER BARREL with provision for two pushrod screws
Product code: 45275A
Normal Qty Required: 1
CYLINDER BARREL (ALLOY) with provision for two pushrod screws
CYLINDER BARREL (ALLOY) with provision for two pushrod screws
Product code: 39037
Normal Qty Required: 2
CYLINDER BASE GASKET
Product code: 47524
Normal Qty Required: 1
COMPRESSION PLATE, 1mm (0.040") thick (250cc range) ** OPTIONAL **
COMPRESSION PLATE, 1mm (0.040") thick (If required)
Product code: F192
Normal Qty Required: 1
NUT, ROCKER COVER STUD LOCK
ROCKER COVER STUD LOCK NUT
Product code: 418ENF
Normal Qty Required: 1
GASKET SET, 250cc CLIPPER and CRUSADER RANGE 1960-67 + 350cc UNIT CONSTRUCTION BULLET 1963 - 65
Product code: SEALSET1
Normal Qty Required: 1
SEALSET, 9 SEALS, 250cc CLIPPER 1958-66, CRUSADER RANGE 1958-67 AND 350cc BULLET (UNIT CONSTRUCTION) 1963, 250cc FIRE ARROW 1958, 250cc HOUNDS ARROW 1958
Shop for accessories at Hitchcocks Motorcycles