Product code: 41183
Normal Qty Required: 1
REAR BRAKE PEDAL (can use Indian part 801031 with modifications)
Product code: 26995
Normal Qty Required: 1
NUT, 3/8" X 26TPI (EACH)
Product code: 26995S
Normal Qty Required: 1
NUT, 3/8'' X 26TPI, BAR TURNED, stainless
** ALTERNATIVE (STAINLESS) **
Product code: 15641
Normal Qty Required: 1
WASHER, FLAT 3/8''
Product code: 15641S
Normal Qty Required: 1
WASHER, FLAT, 3/8'', STAINLESS
** ALTERNATIVE (STAINLESS) **
Product code: 40339
Normal Qty Required: 1
BRAKE PEDAL FULCRUM STUD
Product code: 10314
Normal Qty Required: 1
NUT, THIN, 7/16 X 26tpi (EACH)
Product code: 10314S
Normal Qty Required: 1
NUT, 7/16 X 26tpi, THIN, stainless
** ALTERNATIVE (STAINLESS) **
Product code: 12881
Normal Qty Required: 1
NUT, SHOULDERED, 1/4'' X 26tpi (3/4" overall) Silencer clip
NUT, SHOULDERED, 1/4'' X 26tpi (3/4" overall) Silencer clip
Product code: 4860
Normal Qty Required: 1
BOLT, BRAKE/SILENCER CLIP, 1/4'' X 1.1/16'' X 26TPI
Product code: 27000
Normal Qty Required: 1
NUT, 1/4'' X 26tpi (EACH)
Product code: TC/PZ6
Normal Qty Required: 1
GREASE NIPPLE (EACH)
Product code: 38600
Normal Qty Required: 1
REAR BRAKE ROD, 20.5"
Product code: 38600S
Normal Qty Required: 1
REAR BRAKE ROD, polished stainless
** ALTERNATIVE (STAINLESS) **
Product code: 14691
Normal Qty Required: 1
WASHER, 5/16'' (reduced o/d)
Product code: 17691
Normal Qty Required: 1
BRAKE ROD ADJUSTING NUT, 5/16'' x 26tpi (PRE MID 1994)
Product code: 40738
Normal Qty Required: 1
SILENCER 1.75'' (for 1.5'' SEE 41337)
This silencer has an inlet diameter where the exhaust pipe fits of 1.3/4 inches (approx. 45.00mm)
Product code: 12882
Normal Qty Required: 1
SILENCER CLIP (STAINLESS), 1.7/8", COMPLETE with BOLT (cap head) & NUT
Product code: 27919
Normal Qty Required: 2
WASHER, SHAKEPROOF, 7/16''
Product code: 37199
Normal Qty Required: 1
STUD, 7/16" x 4.1/16" x 26tpi, SILENCER/FOOTREST
Product code: 1898
Normal Qty Required: 2
NUT, 7/16 X 26tpi
NUT, 7/16 X 26tpi
Product code: 1898S
Normal Qty Required: 2
NUT, 7/16'' X 26TPI, STAINLESS
** ALTERNATIVE (STAINLESS) **
Product code: 40527
Normal Qty Required: 1
EXHAUST PIPE, 350 Bullet 1956-58 + 350 Clipper 1958-62. STEPPED END (This pipe is 1.5" and pushes into the cylinder head and steps up to 1.75" for the silencer)
Product code: 33351
Normal Qty Required: 1
FOOTREST BAR with nuts, 12.3/8'' OVERALL
Product code: 39197
Normal Qty Required: 1
FOOTREST DISTANCE TUBE, (3.3/4'')
Product code: 15749
Normal Qty Required: 1
DISTANCE TUBE (2.5'' LONG)
Product code: 33119
Normal Qty Required: 1
FOOTREST ARM L/H (801036)
Product code: 33162
Normal Qty Required: 1
FOOTREST ARM, RH
Product code: 25838
Normal Qty Required: 2
FOOTREST RUBBER, 1/2'' hole (USE 25838A FOR PRE 1956 MODELS) (sold individually)
Product code: 27918
Normal Qty Required: 2
WASHER, SHAKEPROOF, 3/8''
Product code: 1898
Normal Qty Required: 2
NUT, 7/16 X 26tpi
NUT, 7/16 X 26tpi
Product code: 1898S
Normal Qty Required: 2
NUT, 7/16'' X 26TPI, STAINLESS
** ALTERNATIVE (STAINLESS) **
Shop for accessories at Hitchcocks Motorcycles