Product code: 40503
Normal Qty Required: 1
FRAME (LESS ALL FITTINGS)
FRAME (LESS ALL FITTINGS)
Product code: 43158A
Normal Qty Required: 1
FRONT ENGINE PLATE R.H.
FRONT ENGINE PLATE R.H.
Product code: 43159
Normal Qty Required: 1
FRONT ENGINE PLATE L.H.
FRONT ENGINE PLATE L.H.
Product code: 40418
Normal Qty Required: 2
STUD, 1/2" x 4.3/16" x 26tpi, FRONT ENGINE PLATE
FRONT ENGINE PLATE STUD FRAME
Product code: 402
Normal Qty Required: 4
NUT, 1/2'' X 26tpi, REDUCED HEXAGON (EACH)
NUT, 1/2" X 26tpi, REDUCED HEXAGON
Product code: 402S
Normal Qty Required: 4
NUT, 1/2'' x 26tpi, SMALL HEX, STAINLESS
** ALTERNATIVE (STAINLESS) **
Product code: 27920
Normal Qty Required: 4
WASHER, SHAKEPROOF, 1/2'' (EACH)
SHAKEPROOF WASHER, 1/2"
Product code: 39708
Normal Qty Required: 2
REAR ENGINE PLATE (each)
REAR ENGINE PLATE
Product code: 39467
Normal Qty Required: 1
EYE BOLT, CYLINDER HEAD STEADY
CYLINDER HEAD STEADY EYE BOLT
Product code: 35373
Normal Qty Required: 1
HEAD STEADY SLEEVE (140441S)
CYLINDER HEAD STEADY SLEEVE
Product code: DE394
Normal Qty Required: 1
NUT, 3/8" BSF
HEAD STEADY NUT
Product code: DE394S
Normal Qty Required: 1
NUT, 3/8" BSF, stainless
** ALTERNATIVE (STAINLESS) **
Product code: 15267
Normal Qty Required: 1
STUD, 5/16" x 2 5/8" x 26tpi, HEAD STEADY/CRANKCASE
CYL HEAD STEADY STUD (ENGINE)
Product code: 19870S
Normal Qty Required: 2
NUT, 5/16 x 26TPI, BAR TURNED, stainless
** ALTERNATIVE (STAINLESS) **
Product code: 8634
Normal Qty Required: 2
WASHER, FLAT 5/16'' (EACH)
WASHER, FLAT 5/16"
Product code: 8634S
Normal Qty Required: 2
WASHER, FLAT, 5/16'', STAINLESS
WASHER, FLAT, 5/16'', STAINLESS
Product code: 19870
Normal Qty Required: 2
NUT, 5/16'' X 26TPI (EACH)
NUT, 5/16 CYCLE, 1/4" THICK
Product code: 35033
Normal Qty Required: 1
STUD, 3/8" x 2.3/8" x 26tpi, HEAD STEADY + CHAINCASE
STUD HEAD STEADY + CHAINCASE
Product code: 15641
Normal Qty Required: 2
WASHER, FLAT 3/8''
WASHER, FLAT 3/8"
Product code: 15641S
Normal Qty Required: 2
WASHER, FLAT, 3/8'', STAINLESS
** ALTERNATIVE (STAINLESS) **
Product code: 26995S
Normal Qty Required: 2
NUT, 3/8'' X 26TPI, BAR TURNED, stainless
** ALTERNATIVE (STAINLESS) **
Product code: 26995
Normal Qty Required: 2
NUT, 3/8" X 26TPI (EACH)
NUT, 3/8 X 26tpi (BAR TURNED)
Product code: 38853
Normal Qty Required: 1
CHAINSTAY (SWINGING ARM) Approx dimensions: 7.6'' wide at pivot end, 7.7'' between flanges for wheel.
CHAINSTAY ASSEMBLY
Product code: 38854
Normal Qty Required: 1
CHAINSTAY BEARING TUBE 0.841-0.842"
(For oversize use 47312)
Product code: 47312
Normal Qty Required: 1
CHAINSTAY BEARING TUBE, 0.928/9'' (OVERSIZE)
Product code: 38855
Normal Qty Required: 1
CHAINSTAY BEARING STUD
9.1/4" x 9/16" diameter
SWINGING ARM BEARING STUD
Product code: 42124
Normal Qty Required: 2
THRUST WASHER, SWINGING ARM
SWINGING ARM THRUST WASHER
Product code: 38894
Normal Qty Required: 2
NUT, SWINGING ARM, 9/16'' X 26TPI, STAINLESS
NUT, SWINGING ARM, 9/16'' X 26TPI
Product code: 37770
Normal Qty Required: 2
S/ARM DUST EXCLUDER RUBBER, (39816)
S/ARM DUST EXCLUDER RUBBER, (39816)
Product code: TC/PZ6
Normal Qty Required: 2
GREASE NIPPLE (EACH)
GREASE NIPPLE
Product code: 42002
Normal Qty Required: 2
PIN, SUSPENSION PIVOT, 3/8 x 26tpi (TOP)
SUSPENSION PIVOT PIN (TOP)
Product code: 42002S
Normal Qty Required: 2
SUSPENSION PIVOT PIN (TOP) **stainless**
** ALTERNATIVE (STAINLESS) **
Product code: GR/SB3/227
Normal Qty Required: 1
REAR SHOCK ABSORBERS (290mm), PAIR, FULLY ENCLOSED, HAGON
REAR SHOCK ABSORBER (PAIR) HAGON
Product code: 26374
Normal Qty Required: 2
NUT, TOP SHOCK ABSORBER BOLT + WHEEL SPINDLE (EACH)
SUSPENSION PIVOT PIN NUT
Product code: 26374S
Normal Qty Required: 2
NUT, SUSPENSION PIVOT PIN **stainless**
** ALTERNATIVE (STAINLESS) **
Product code: 6740
Normal Qty Required: 2
WASHER, 3/8 (EACH)
WASHER
Product code: DE394
Normal Qty Required: 2
NUT, 3/8" BSF
NUT 3/8 BSF, bar turned
Product code: DE394S
Normal Qty Required: 2
NUT, 3/8" BSF, stainless
** ALTERNATIVE (STAINLESS) **
Product code: 33783
Normal Qty Required: 2
WASHER, REAR SHOCK PIVOT PIN "D" Internal hole
R/SHOCK PIVOT PIN WASHER (BTM)
Product code: 38152
Normal Qty Required: 1
CENTRE STAND (ALLOY), BARE
CENTRE STAND BARE
Product code: KIT2
Normal Qty Required: 1
ALLOY STAND FIXING KIT
ALLOY STAND FIXING KIT
Product code: 33824
Normal Qty Required: 1
CENTRE STAND SLEEVE
CENTRE STAND SLEEVE
Product code: 34113
Normal Qty Required: 1
CENTRE STAND SPINDLE, (40461)
CENTRE STAND SPINDLE, (40461)
Product code: TC/PZ65
Normal Qty Required: 1
GREASE NIPPLE, 1/4bsf angled
GREASE NIPPLE ANGLED
Product code: 10314
Normal Qty Required: 2
NUT, THIN, 7/16 X 26tpi (EACH)
STUD NUT, THIN
Product code: 10314S
Normal Qty Required: 2
NUT, 7/16 X 26tpi, THIN, stainless
** ALTERNATIVE (STAINLESS) **
Product code: 40460
Normal Qty Required: 1
SPRING, CENTRE STAND
CENTRE STAND SPRING
Product code: 36861
Normal Qty Required: 1
CENTRE STAND SPRING POST (3/8")
CENTRE STAND SPRING POST
Product code: AR/AT6/340/2
Normal Qty Required: 2
REAR SUSPENSION OUTER SHROUD (BLACK)
REAR SUSPENSION OUTER SHROUD
Product code: AR/AT6/339/2
Normal Qty Required: 2
INNER SHROUD, CHROME
INNER SHROUD, CHROME
Product code: GR/9054/316H
Normal Qty Required: 4
BUSH, REAR SHOCK ABSORBER (EACH)
REAR SHOCK BUSH
Product code: 33789A
Normal Qty Required: 2
SWINGING ARM LOCK SCREW (2BA)
SWINGING ARM LOCK SCREW (2BA)
Shop for accessories at Hitchcocks Motorcycles