Product code: 22899
Normal Qty Required: 1
STRAP, MAGDYNO
Product code: 19068
Normal Qty Required: 1
MAGDYNO STRAP TRUNNION (PLAIN)
Product code: 19069
Normal Qty Required: 1
MAGDYNO STRAP TRUNNION (TAPPED)
MAGDYNO STRAP TRUNNION (THREADED)
Product code: 19202
Normal Qty Required: 1
STUD, 1/4" x 2.1/4" x 26tpi, MAGDYNO STRAP TRUNNION
MAGDYNO STRAP TRUNNION STUD
Product code: 12881
Normal Qty Required: 1
NUT, SHOULDERED, 1/4'' X 26tpi (3/4" overall) Silencer clip
NUT, SHOULDERED, 1/4'' X 26tpi (3/4" overall) Silencer clip
Product code: 23584
Normal Qty Required: 1
MAGNETO STRAP STUD, (CRANKCASE)
MAG ANCHOR STUD
Product code: 24489
Normal Qty Required: 1
CYLINDER BARREL, 350cc (MODEL G, GDLX, CO and CLIPPER 1955-57), **USED**, CONDITION 5/10 - COUPLE OF BROKEN FINS, WILL REQUIRE REBORING
CYLINDER BARREL, **USED** CONTACT US FOR DETAILS
Product code: 24494
Normal Qty Required: 2
CYLINDER BASE GASKET
Product code: 25861
Normal Qty Required: 2
PUSHROD TUNNEL SEAL, SOLD INDIVIDUALLY, new style Viton
PUSH ROD TUNNEL SEAL
Product code: 22604
Normal Qty Required: 1
TAPPET COVER
Product code: 21869
Normal Qty Required: 1
TAPPET COVER GASKET
Product code: 24496
Normal Qty Required: 1
TAPPET COVER STUD (5/16" x 26TPi x 2")
TAPPET COVER STUD
Product code: 17385
Normal Qty Required: 1
TAPPET COVER WING NUT (pre 1999)
TAPPET COVER WING NUT
Product code: 8634
Normal Qty Required: 1
WASHER, FLAT 5/16'' (EACH)
TAPPET COVER STEEL WASHER
Product code: 8634S
Normal Qty Required: 1
WASHER, FLAT, 5/16'', STAINLESS
** ALTERNATIVE (STAINLESS) **
Product code: 25990
Normal Qty Required: 1
TAPPET COVER FIBRE WASHER
Product code: 26198
Normal Qty Required: 2
FERRULE, CYLINDER HEAD
CYLINDER HEAD FERRULE
Product code: 24490
Normal Qty Required: 1
CYLINDER HEAD GASKET
Product code: 17601
Normal Qty Required: 4
STUD, 3/8" x 1.5/8" x 26tpi, CYLINDER HEAD
CYLINDER HEAD STUD
Product code: 17602
Normal Qty Required: 4
CYLINDER HEAD NUT, 3/8'' X 26TPI
Product code: 15641
Normal Qty Required: 4
WASHER, FLAT 3/8''
CYLINDER HEAD NUT WASHER
Product code: 15641S
Normal Qty Required: 4
WASHER, FLAT, 3/8'', STAINLESS
** ALTERNATIVE (STAINLESS) **
Product code: 25098
Normal Qty Required: 1
ROCKER COVER (For Model J & J2 use 22601)
ROCKER COVER "USED"
Product code: 21664
Normal Qty Required: 1
ROCKER COVER GASKET (For Model J & J2 use 22627)
ROCKER COVER GASKET
Product code: 21468
Normal Qty Required: 1
ROCKER COVER STUD (5/16" x 26TPi x 2.7/8")
ROCKER COVER STUD
Product code: 24054
Normal Qty Required: 1
NUT, ROCKER COVER, 5/16'' x 26tpi shouldered
ROCKER COVER NUT
Product code: 1846
Normal Qty Required: 1
WASHER, ROCKER STUD
ROCKER COVER STUD WASHER
Product code: 16567
Normal Qty Required: 1
INLET VALVE (0.3425'' - 0.3435")
INLET VALVE (0.3425" - 0.3435")
Product code: 16362
Normal Qty Required: 1
EXHAUST VALVE (0.3420'' - 0.3430")
EXHAUST VALVE (0.3420" - 0.3430")
Product code: 22641
Normal Qty Required: 2
VALVE GUIDE, 0.623-0.624" (Standard size) Iron
Product code: VS61
Normal Qty Required: 2
VALVE SPRING SET, 4 springs (19427/8)
VALVE SPRING SET, 4 SPRINGS
Product code: 35238
Normal Qty Required: 2
VALVE SPRING COLLAR, TOP (For early valves with taper for split collars)
VALVE SPRING COLLAR (TOP)
Product code: 33508
Normal Qty Required: 2
VALVE SPRING COLLAR, BOTTOM (For early valves with taper for split collars)
VALVE SPRING COLLAR (BOTTOM)
Product code: 11099
Normal Qty Required: 2
VALVE SPLIT COLLAR , ORDER 1 PER VALVE (2 Halves)
VALVE SPLIT COLLAR (1 NEEDED PER VALVE) Early type
Product code: 10672
Normal Qty Required: 2
CAP, VALVE STEM *sold individually*
VALVE STEM CAP
Product code: 28088
Normal Qty Required: 1
PUSHROD, INLET with ends and adjuster
INLET PUSHROD WITH ENDS
Product code: 28089
Normal Qty Required: 1
PUSHROD, EXHAUST with ends and adjuster
EXHAUST PUSHROD WITH ENDS
Product code: 15916
Normal Qty Required: 2
PUSHROD CUP
PUSH ROD CUP (TOP)
Product code: 21863
Normal Qty Required: 1
PUSHROD END (Bottom on Bullets/G or Top on Crusaders)
PUSH ROD END (BOTTOM) INLET
Product code: 21864
Normal Qty Required: 1
PUSHROD END (BOTTOM) EXHAUST
PUSH ROD END (BOTTOM) EXHAUST
Product code: 21865
Normal Qty Required: 2
ADJUSTING SCREW, PUSHROD, UK MADE, IMPERIAL
PUSH ROD ADJUSTING SCREW
Product code: 27620
Normal Qty Required: 2
NUT, 1/4'' X 26TPI (EACH)
PUSH ROD ADJUSTING SCREW NUT
Product code: 27620S
Normal Qty Required: 2
NUT, 1/4'', BAR TURNED, stainless
** ALTERNATIVE (STAINLESS) **
Product code: 21867
Normal Qty Required: 1
VALVE LIFTER
Product code: 24495
Normal Qty Required: 1
VALVE LIFTER SPINDLE
Product code: 21815
Normal Qty Required: 1
VALVE LIFTER SPRING (4/037)
VALVE LIFTER SPRING
Product code: 5915
Normal Qty Required: 1
WASHER, 1/4'' (Small OD) (EACH)
MAGDYNO STRAP TRUNNION WASHER
Shop for accessories at Hitchcocks Motorcycles