Product code: ROCKERSET
Normal Qty Required: 1
ALLOY/STEEL ROCKER SET, (Inlet and Exhaust) SUPPLIED COMPLETE WITH O RINGS Made by Parado
Product code: 39629
Normal Qty Required: 1
CYLINDER HEAD, *USED* CAST IRON, CRUSADER, WILL HAVE 1 - 2 BROKEN FINS, CONDITION 6/10.
CYLINDER HEAD, *USED* CAST IRON
Product code: 38875
Normal Qty Required: 1
CYLINDER HEAD GASKET (EARLY)
CYLINDER HEAD GASKET, early for use with zero or one allen screws down pushrod tunnel
Product code: 35392
Normal Qty Required: 1
EXHAUST VALVE (350B UP TO 1959)
FOR USE WITH **STEEL** VALVE SPRING TOP COLLARS
EXHAUST VALVE
Product code: 39156
Normal Qty Required: 1
INLET VALVE FOR USE WITH **STEEL** VALVE SPRING TOP COLLARS
INLET VALVE
Product code: 22641
Normal Qty Required: 1
VALVE GUIDE, 0.623-0.624" (Standard size) Iron
VALVE GUIDE (IRON HEAD), INLET
Product code: 25524
Normal Qty Required: 1
VALVE GUIDE, 0.627" (Standard size), ENGLISH MADE
VALVE GUIDE (ALLOY HEAD), INLET, STD
Product code: 25524/10
Normal Qty Required: 1
VALVE GUIDE, 0.637" (Oversize by 0.010''), ENGLISH MADE
VALVE GUIDE (ALLOY HEAD), INLET, +0.010
Product code: 25524/20
Normal Qty Required: 1
VALVE GUIDE, 0.647" (Oversize by 0.020'')
VALVE GUIDE (ALLOY HEAD), INLET, +0.020
Product code: 25524/3
Normal Qty Required: 1
VALVE GUIDE, 0.630" (Oversize by 0.003''), ENGLISH MADE
VALVE GUIDE (ALLOY HEAD), INLET, +0.003
Product code: 25524/5
Normal Qty Required: 1
VALVE GUIDE, 0.632" (Oversize by 0.005''), ENGLISH MADE
VALVE GUIDE (ALLOY HEAD), INLET, +0.005
Product code: VS494
Normal Qty Required: 1
VALVE SPRING SET, 4 springs, (39659/60) For early valves with taper for split collars
VALVE SPRING SET, 4 SPRINGS
Product code: 35238
Normal Qty Required: 2
VALVE SPRING COLLAR, TOP (For early valves with taper for split collars)
VALVE SPRING COLLAR (TOP)
Product code: 33508
Normal Qty Required: 2
VALVE SPRING COLLAR, BOTTOM (For early valves with taper for split collars)
VALVE SPRING COLLAR (BOTTOM)
Product code: 11099
Normal Qty Required: 2
VALVE SPLIT COLLAR , ORDER 1 PER VALVE (2 Halves)
VALVE SPLIT COLLAR (1 NEEDED PER VALVE) Early type
Product code: 10672
Normal Qty Required: 2
CAP, VALVE STEM *sold individually*
VALVE STEM CAP
Product code: ROCKERSET
Normal Qty Required: 1
ALLOY/STEEL ROCKER SET, (Inlet and Exhaust) SUPPLIED COMPLETE WITH O RINGS Made by Parado
HI-TEC ALLOY/STEEL ROCKER SET
Product code: 38874
Normal Qty Required: 2
ROCKER BEARING PLATE ** used **
Product code: 16982
Normal Qty Required: 8
STUD, 1/4" x 2.1/8" x 26tpi, ROCKER BEARING
ROCKER BEARING STUD
Product code: 27305
Normal Qty Required: 8
ROCKER BEARING NUT, SMALL HEX
Product code: 9908
Normal Qty Required: 8
WASHER, ROCKER + MANIFOLD
ROCKER NUT WASHER
Product code: 38871
Normal Qty Required: 1
ROCKER COVER (CAN USE 45800+45801)
ROCKER COVER
Product code: 38872
Normal Qty Required: 1
GASKET,ROCKER COVER.
Product code: 42854
Normal Qty Required: 1
ROCKER COVER CENTRE STUD, SHOULDERED FOR EARLY MODELS
ROCKER COVER STUD
Product code: 24054
Normal Qty Required: 1
NUT, ROCKER COVER, 5/16'' x 26tpi shouldered
ROCKER COVER NUT, SHOULDERED
Product code: 1846
Normal Qty Required: 1
WASHER, ROCKER STUD
ROCKER COVER STUD WASHER
Product code: 35470
Normal Qty Required: 2
STUD, 5/16" x 1.3/16" x 26tpi, CARBURETTER
CARBURETTER STUD
Product code: 27001
Normal Qty Required: 2
NUT, SHOULDERED 5/16 X 26tpi (EACH)
CARBURETTER STUD NUT
Product code: 14611
Normal Qty Required: 2
WASHER, SPRING, 5/16"
CARBURETTER STUD WASHER
Product code: 90180
Normal Qty Required: 1
SPACER, TUFNOL, 22mm (7/8 inch), 3mm THICK
CARBURETTER SPACER WASHER
Product code: 39346
Normal Qty Required: 4
STUD, 5/16" x 6.5/8" BSF, CYLINDER HEAD, LONG
CYLINDER HEAD STUD, LONG 6.5/8
Product code: 33036
Normal Qty Required: 4
CRUSADER HEAD STUD NUT, 5/16" BSF
CYLINDER HEAD STUD NUT, INSIDE
Product code: 90120
Normal Qty Required: 4
WASHER, CYLINDER HEAD INTERNAL (SMALL O/D), 2.5mm HARDENED
CYLINDER HEAD WASHER, INSIDE
Product code: 39345
Normal Qty Required: 1
STUD, 5/16" x 5.5/16" BSF, CYLINDER HEAD, SHORT
CYLINDER HEAD STUD, SHORT 5.1/4
Product code: 27621
Normal Qty Required: 1
NUT, 5/16 BSF , THICK (EACH)
CYLINDER HEAD STUD NUT, OUTSIDE
Product code: 27621S
Normal Qty Required: 1
NUT, 5/16 BSF (DEEP), stainless
** ALTERNATIVE (STAINLESS) **
Product code: 8634
Normal Qty Required: 1
WASHER, FLAT 5/16'' (EACH)
CYLINDER HEAD STUD WASHER, OUTSIDE
Product code: 8634S
Normal Qty Required: 1
WASHER, FLAT, 5/16'', STAINLESS
WASHER, FLAT, 5/16'', STAINLESS
Product code: 38865
Normal Qty Required: 1
CYLINDER BARREL, CRUSADER(EARLY), **USED**, CONDITION 7/10 - NO BROKEN FINS, LOW BORE BUT WILL REQUIRE REBORING, Note: The type with NO allen screws in the p/rod tunnels
CYLINDER BARREL, **USED** CONTACT US FOR DETAILS
Product code: 39037
Normal Qty Required: 2
CYLINDER BASE GASKET
Product code: 47524
Normal Qty Required: 1
COMPRESSION PLATE, 1mm (0.040") thick (250cc range) ** OPTIONAL **
COMPRESSION PLATE, 1mm (0.040") thick (If required)
Product code: 21322
Normal Qty Required: 1
VALVE GUIDE, 0.623-0.624" (Standard size) Iron LONG
VALVE GUIDE (IRON HEAD), EXHAUST
Product code: 44045
Normal Qty Required: 1
VALVE GUIDE, 0.627" (Standard size) EXHAUST
VALVE GUIDE (ALLOY HEAD), STD
Product code: 44045/3
Normal Qty Required: 1
VALVE GUIDE, 0.630" (Oversize by 0.003'') EXHAUST
VALVE GUIDE (ALLOY HEAD), +0.003
Shop for accessories at Hitchcocks Motorcycles